Adaptec Series 7 RAID Controller 6 Gb
Zur Navigation springen
Zur Suche springen
In diesem Artikel finden Sie Informationen zu Adaptec Series 7 SAS/SATA 6 Gb RAID Controllern. Alle Controller im Überblick zeigt der Artikel Adaptec RAID Controller.
Allgemeine Informationen
- RAID Controller Serie: Adaptec Series 7 SAS/SATA 6 Gb
- Schnittstelle: 6Gb/s SAS/SATA / PCIe Gen3
- Bauhöhe: Low Profile (Slot-Blech für Low Profile und Full Profile enthalten)
- Weitere Informationen:
- Adaptec gegen LSI: SAS-RAID-Controller mit PCIe 3.0 im Test (tomshardware.de, 06.02.2013)
Modelle
RAID Controller | Ports intern |
Ports extern |
PCIe Lanes | Cache | Cache-Schutz | RAID-Level | Max. Anzahl SSDs/HDDs bei Verw. von SAS Expandern |
Anmerkungen |
---|---|---|---|---|---|---|---|---|
Adaptec RAID 7805 | 8 | - | 8 | 1024MB | Optional (ZMCP) | 0, 1, 1E, 5, 6, 10, 50, 60 | 256 | |
Adaptec RAID 71605 | 16 | - | 8 | 1024MB | Optional (ZMCP) | 0, 1, 1E, 5, 6, 10, 50, 60 | 256 | |
Adaptec RAID 71605E | 16 | - | 8 | 1024MB | Nein | 0, 1, 1E, 10 | 256 | |
Adaptec RAID 71685 | 16 | 8 | 8 | 1024MB | Optional (ZMCP) | 0, 1, 1E, 5, 6, 10, 50, 60 | 256 | |
Adaptec RAID 72405 | 24 | - | 8 | 1024MB | Optional (ZMCP) | 0, 1, 1E, 5, 6, 10, 50, 60 | 256 | |
Adaptec RAID 7805Q | 8 | - | 8 | 1024MB | Inkludiert (ZMCP) | 0, 1, 1E, 5, 6, 10, 50, 60 | 256 | maxCache 3.0 |
Adaptec RAID 71605Q | 16 | - | 8 | 1024MB | Inkludiert (ZMCP) | 0, 1, 1E, 5, 6, 10, 50, 60 | 256 | maxCache 3.0 |
Versionsinformationen
Build 30612 (13 Aug 2013)
- Release Notes Build 30612, Auszug aus Enhancements and Bug Fixes:
- Resolved an issue where I/O would slow and eventually result in a controller reset
- Resolved an issue where RAID 1 members went missing if moved to different slots
- Resolved an issue where set drive write cache command would fail using ARCCONF
- Resolved an issue where drive firmware update would fail using maxView
- Resolved an issue that would result in a drive dropping from the controller during an IOP reset
- Resolved an issue that would cause inconsistent drive cache settings to be set
- Resolved an issue where Series 7 controller would hang when UEFI HII was enabled on ASUS P8B-M/P8B-X/P9D-MH
- Resolved an issue where hot-plug expander based enclosures and drives would not be properly discovered
- Resolved an issue where alarm would not silence when alarm control mode was set to disabled in UEFI
- Resolved an issue where USB keyboard would stop working if hot removed and re-inserted while in UEFI BIOS
- Write performance enhancements
- Resolved an issue where Series 7 controller was not detected during cold boot on some Asus/Tyan/Intel motherboards
- Resolved an issue that prevented a RAW device from being configured as a bootable OS driv
Build 30260 (5 May 2013)
- Release Notes Build 30260, Auszug aus Enhancements and Bug Fixes:
- Added dual firmware image support
- Super capacitor charge is now displayed in Host utilities
- Added super capacitor lifetime prediction
- Increased max outstanding IO to 1024, to improve performance on spinning disks on high queue depth random IO
- Resolved an issue where Redhat 6.4 inbox driver would not load
- Resolved an issue which would cause a corrupt GPT partition after reboot using 3 TB Raw Drive
- Rebuilds no longer occur in parallel on multiple containers that share the same physical drives
- Resolved an issue that would cause a controller kernel PANIC when a SC846Ex expander is attached
- Resolved an issue where a RAID volume could not be deleted from BIOS
- Resolved an issue where a failed array could not be deleted from BIOS
- Fixed an issue where the controller cannot initialize with defective drive connected
- Resolved an issue where Controller Kernel Stopped Running when attempting to create a RAID 10 using Clear Method
- Resolved an issue where build/verify failed on the second logical drive after the first completed on the same physical drives
- Fixed an issue that would lead to a firmware crash during the mkfs command on SLES 11 x64 SP2
- Copyback implemented for uninitialized drive
- Resolved an issue where Remote Arcconf (VMware ESXi 5.0) can’t delete the logical drives from Windows 7 x64 GuestOS.
- Resolved an issue where SMC 846EL2(SAS2X36) with FW 0e0b would not detect any drive
- Resolved an issue where a removed simple 'Volume' is not shown as 'offline'
- Resolved an issue where controller alarm doesn’t stay on when hot removed enclosure with IO running
- Resolved an issue where BIOS setting changes would not save after reboot
- Resolved a firmware hang condition when performing Online Capacity Expansion on a RAID
- UEFI Disk Utilities now shows pass or fail result/completion after disk verify
- Changed message to Not supported (SES/SGPIO mode only) when attempting to Identify/blink drives on a passive backplane
- Resolved an issue where blinking a drive would result in the wrong drive blinking in Promise enclosures
- Resolved an issue where a RAID rebuild would not start if same drive was re-inserted
- Resolved a controller hang issue when using the ACU utility to check on the build task progress of RAID-5 arrays
- Resolved an issue with wrong status being reported after R6/R60 rebuild completes
- Resolved an issue where RAID 0 maxCache Container is not converted to Simple Volume when there is a drive failure
- Resolved an issue where incorrect array ID and RAID level were displayed in UEFI Manage Array menu
- Resolved an issue where smartctl –x /dev/xxx fails on SATA drives
- Modified messaging for Global Hot Spare in UEFI
- Resolved an issue where SSDs partially used for a maxCache container were not available for RAID creation in UEFI
- Changed spare messaging in HII
- Resolved an issue where the bottom border was missing when displaying R50 or R60 with 7 members on each leg
- Resolved an issue where CRC errors were causing drives to be marked offline
- Resolved an issue where periodic performance drops would occur due to enclosure management communication
- Adaptec maxView Storage Manager v1.02 Readme
Build 30040 (29 Jan 2013)
- Release Notes Build 30040, Auszug aus Enhancements and Bug Fixes:
- Resolved a possible GPT partition corruption issue when a drive greater than 2TB is configured as a RAW drive in a Linux OS on a Series7 controller in HBA mode.
Build 30035 (21 Dec 2012)
- Release Notes Build 30035, Auszug aus Enhancements and Bug Fixes:
- Resolved an issue that would prevent the installation of FreeBSD 9.0 when a Series 7 controller is set to HBA mode.
- Resolved an issue that would prevent a Series 7 controller from being put into HBA mode.
Build 30032 (28 Nov 2012)
- Release Notes Build 30032, Auszug aus Enhancements and Bug Fixes:
- Resolved an issue with ARCCONF command line interface, Advance Statistics "Overall read(write) in MB" not reporting in the correct units.
- Resolved an issue where SAS drives could potentially be marked as failed during a RAID creation following a system reboot.
- Resolved an issue with ARCCONF command line interface, where "IO completion time" were incorrectly reported.
- Resolved an issue where the AFM-700 incorrectly shows as "Not Ready" during POST when fully charged.
- Resolved an issue that would prevent a system from booting if maxCache is disabled on a bootable array.
- Adaptec maxView Storage Manager v1.0 Readme
Build 30021
- (Initiale Firmware)
Anmerkungen
Autor: Franz Nemeth
Das könnte Sie auch interessieren
Adaptec RAID Controller in VMware überwachen
Adaptec Zero Maintenance Cache Protection
Optionen beim Erstellen eines Adaptec RAID Arrays