ATP A600Vc M.2 2242 SATA SSDs
Zur Navigation springen
Zur Suche springen
Dieser Artikel enthält Detail-Informationen zu den ATP A600Vc M.2 2242 SATA SSDs.
Allgemeine Informationen
- SSD Serie: ATP A600Vc M.2 2242 (Value Product Line)
- Datenblätter:
- Formfaktor: M.2 2242
- NAND Flash Memory: TLC
- Schnittstelle: SATA 6 Gb/s ("SATA III")
Modelle
SSD | Kapazität (netto) |
Kapazität (brutto) |
Spare Area (GB und % zus. zur Netto-Kap.) |
Flash-Chips | Haltbarkeit (Endurance) |
Durchsatz (max. Bandbreite) |
IOPS (max. Random IOPS Performance) | |||
---|---|---|---|---|---|---|---|---|---|---|
Lesen | Schreiben | Lesen | Schreiben (über erste 8 GiB) |
Schreiben (über ges. Datenbereich) | ||||||
AF64GSTIA-TM1 | 64 GB (64.023.257.088 Byte) |
n/a GiB (n/a GB) | n/a GB (n/a%) |
n/a | 96 TBW (JEDEC219 Client Workload) |
430 MB/s | 70 MB/s | 61.000 IOPS | n/a | 71.000 IOPS |
Firmware
Date | Revision | Description |
---|---|---|
n/a | SBFMB1.1 | Firmware of 64 GB device. |
Quelle: Firmware Release Notes oder Auslesen von SSD-Informationen.
Programmausgaben
smartctl
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-47-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ATP SATA III M.2 2242 Serial Number: 4AC9079216FB00003004 LU WWN Device Id: 0 000000 000000000 Firmware Version: SBFMB1.1 User Capacity: 64.023.257.088 bytes [64,0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: Unknown(0x0ff8) (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 9 12:12:07 2019 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 16 168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0 170 Unknown_Attribute 0x0003 079 079 010 Pre-fail Always - 30 173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 1 192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 13 194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) 218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0 231 Temperature_Celsius 0x0013 100 100 000 Pre-fail Always - 100 241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 11 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
hdparm
hdparm -I /dev/sdb /dev/sdb: ATA device, with non-removable media Model Number: ATP SATA III M.2 2242 Serial Number: 4AC9079216FB00003004 Firmware Revision: SBFMB1.1 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 Standards: Supported: 11 10 9 8 7 6 5 Likely used: 11 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 125045424 LBA48 user addressable sectors: 125045424 Logical Sector size: 512 bytes Physical Sector size: 512 bytes Logical Sector-0 offset: 0 bytes device size with M = 1024*1024: 61057 MBytes device size with M = 1000*1000: 64023 MBytes (64 GB) cache/buffer size = unknown Form Factor: unknown (0x0007] Nominal Media Rotation Rate: Solid State Device Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE SET_MAX security extension * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Gen3 signaling speed (6.0Gb/s) * Native Command Queueing (NCQ) * Phy event counters * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT * DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * DOWNLOAD MICROCODE DMA command * SET MAX SETPASSWORD/UNLOCK DMA commands * WRITE BUFFER DMA command * READ BUFFER DMA command * DEVICE CONFIGURATION SET/IDENTIFY DMA commands * Data Set Management TRIM supported (limit 8 blocks) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 20min for SECURITY ERASE UNIT. 60min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 0000000000000000 NAA : 0 IEEE OUI : 000000 Unique ID : 000000000 Checksum: correct
Einzelnachweise
Autor: Werner Fischer Werner Fischer arbeitet im Product Management Team von Thomas-Krenn. Er evaluiert dabei neueste Technologien und teilt sein Wissen in Fachartikeln, bei Konferenzen und im Thomas-Krenn Wiki. Bereits 2005 - ein Jahr nach seinem Abschluss des Studiums zu Computer- und Mediensicherheit an der FH Hagenberg - heuerte er beim bayerischen Server-Hersteller an. Als Öffi-Fan nutzt er gerne Bus & Bahn und genießt seinen morgendlichen Spaziergang ins Büro.
|
Das könnte Sie auch interessieren
ATP A600Sc T22 mSATA SSDs
ATP A600Vc mSATA SSDs
ATP N600Sv M.2 NVMe SSD