Creating Advanced Configuration
1.
In the Server dashboard or the Controller dashboard, select Configure > Advanced Configuration.
The Advanced Configuration window opens.
2.
Select the RAID level desired for the drive group from the drop-down menu. To make a spanned volume, select RAID 10 in the RAID Level Setting field.
NOTE Click Compare and Select to view the detailed information on each RAID level.
3.
Select the Data Protection check box. Selecting this check box detects data corruption on media and prevents the system errors caused by silent data corruption (SDC).
NOTE To create a virtual drive with data protection, you must have the PI Drive. The Data Protection check box is disabled when there are no secured drives.
4.
Click Next.
5.
Click Add Physical Drives to add physical drives to the drive group.
The Available Unconfigured Drives window appears.
For information on adding the unconfigured drives to the drive group, see Selecting Available Unconfigured Drive.
7.
Click Add Virtual Drives to add virtual drives to the drive group.
The Virtual Drive Settings window appears.
Depending on your controller, specify the virtual drive settings.
8.
Click Add Virtual Drives.
The newly created virtual drive appears in the Advanced Configuration section just below the Virtual Drives section.
If you want to modify the virtual drive settings before finishing the configuration, click the Back button and modify the virtual drive settings accordingly.
9.
Click Finish.
A message appears stating that the configuration is complete.
August 18, 2017. pub-005294 |
Copyright© 2017 by Broadcom. All rights reserved. |